Create an Enrollment Bundle

1. In the Menu Pane, select Node Tools > Enrollment Bundles.
   The ENROLLMENT BUNDLES page displays.

2. At the top of the page, cick Add Enrollment Bundle.
   The NEW ENROLLMENT BUNDLE page displays.

3. Under BUNDLE DETAILS:

   1. Enter a Name for the bundle.

   2. Enter a Token for the bundle.

   3. Set Auto-approve node to Enabled or Disabled.
      The default setting is Disabled.
      When Enabled, a device configured using this enrollment bundle is not placed in pending mode during the enrollment process. Instead, it is automatically approved for enrollment.

   4. Under Subscription Selection, select the subscription type you want to apply to the bundle.
      Where only one subscription is available, this is selected for you

4. Under BUNDLE TAGS, select or create the tags to apply to any nodes that enroll using this enrollment bundle:

   1. Click Add Tag.

   2. In the Tag Name field, either select a key from the drop-down, or type a new key and click Add new Tag.

   3. In the Tag Value field, either select a value from the drop-down or type a new value and click Add new Value.

5. Under BUNDLE TEMPLATES, select the templates to apply to any nodes that enroll using this Enrollment bundle:

   • To add a template:

     1. Click Add Templates.
        The CHOOSE TEMPLATES dialog displays.

     2. Select the check box for the templates you want to add.

     3. Click Add.

   • To remove a template, click the icon for the individual template.

     Note:  The templates in the table are executed in the order they appear. The templates can be reordered using the icons.

     Caution: Template push operations stop if one template fails.

6. Under NETOPS MODULES, select the NetOps modules to automatically activate for any supported nodes:

   Note: The availability of this section is dependent on your subscription type. If you have more than one subscription type, this section may be available but an error message may display if you try to add NetOps modules but did not select the right type of subscription in step 3.

   • To add a bundle:

     1. Click Add Module.
        The CHOOSE MODULE dialog displays.
        

     2. Select the required NetOps Module from the list.

     3. Click Add.

   • To remove a bundle, click the icon for the individual bundle.

     Note:  The modules in the table are executed in the order they appear. The modules can be reordered by using the icons.

     Caution: Module push operations stop if one template fails.

7. Click Apply.